CY2309SXC-1
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Max Supply Current | 32mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Height | 1.48mm |
| Length | 9.98mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
CY2309SXC-1 Overview
Clock ICs are packaged using the Tube method. As part of the 16-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 16 terminations can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. LVCMOS, LVTTL is designed as this clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. PLL clock is mounted in the way of Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. There are 3V~3.6V available for use with this clock PLL. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. Clock PLL is equipped with 16 pin count. This part number CY2309 is related to the following electrical components. The clock PLL has 16 pins that are available. This time clock generator can handle a voltage of 3.3V as its supply voltage. Fundamentally, this is a kind of Clock Drivers clock PLL. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. The maximal same edge skew (tskwd) can not be exceeded. By operating at a frequency of 133.33MHz, RF synthesizer is able to reali133.33MHze high efficiency. During these clock generator operations, the maximum current supplied reaches 32mA.
CY2309SXC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2309SXC-1 Clock Generators applications.
- HDD recorders
- Telecommunication systems
- Coherent carrier tracking
- Televisions
- Media broadcast servers
- Wireless infrastructure
- Various decoding circuits
- Medical equipment
- Bluetooth transmitters
- Frequency Modulation (FM) stereo decoders
