CY23S08SXC-1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY23S08 |
| Output | LVCMOS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 140MHz |
| Family | 23S |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.275 ns |
| Propagation Delay (tpd) | 0.275 ns |
| Same Edge Skew-Max (tskwd) | 0.3 ns |
| Length | 9.893mm |
| Width | 3.8985mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23S08SXC-1 Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 16 terminations in this file. This time clock generator should be voltaged at 3.3V. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. A clock-based RF synthesizer that provides a max frequency of 140MHz is available. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number CY23S08, its related parts can be found. Clock generator is designed with 16 pins. Time clock generator is capable of handling a voltage of 3.3V. This clock generator can be classified as a kind of Clock Drivers in general. At 0.3 ns Max, this analog clock generator exhibits low timing skew. By searching for the 23S family, it is possible to find similar electrical components.
CY23S08SXC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S08SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY23S08SXC-1 Clock Generators applications.
- Frequency shifting decodes
- Wireless infrastructure
- Cable television converter boxes
- Media broadcast servers
- Picocells, femtocells and small cells
- Myriad digital applications
- Wireless base station for LTE, LTE-advanced
- Test and instrumentation equipment
- Signal generator
- Bluetooth receivers
