Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
1999 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY23S09 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
32mA |
Frequency (Max) |
133.33MHz |
Family |
23S |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
0.35 ns |
Same Edge Skew-Max (tskwd) |
0.25 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY23S09SXC-1HT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 16 terminations in this file. This clock generator ic should receive a voltage of 3.3V. This clock generator receives its inputs from LVCMOS, LVTTL, which is designed to be the clock source. There are 1 circuits implemented in order to achieve full performance from this electronic part. This clock-based frequency generator provides a frequency up to 133.33MHz Max. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage (Vsup) should be kept above 3V for normal operation. Clock generator ic works with 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 16-bit clock PLL designed specifically for microprocessors. According to the base part number, its related parts can be founded. The frequency generator is equipped with 16 pins. RF synthesizers can handle voltages up to 3.3V. The clock PLL is generally classified as a Clock Drivers device. The output frequency can be magnified as high as possible with the assistance of 9 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.25 ns max. This PLL belongs to the family of 23S.
CY23S09SXC-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S09SXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY23S09SXC-1HT Clock Generators applications.
- Communication infrastructure
- Multiplexing communication
- FM demodulation networks for FM operations
- Cell phones
- Computers to manage memory cards
- Wireless base station for LTE, LTE-advanced
- Digital circuits
- Electronic countermeasures
- VSAT (Small Ground Satellite Station)
- Signal generator