CY25100SXIF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Spread Spectrum Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.13V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY25100 |
| Output | CMOS |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 35mA |
| Frequency (Max) | 200MHz |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY25100SXIF Overview
As a clock IC, PLLs is packaged using the Tube method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 8 terminations found in this file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. CMOS, Crystal is designed as this clock generator's input. It is possible to access the full performance of the electrical part by implementing 1 circuits. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. In terms of supply voltage, RF synthesizer works with 3.13V~3.45V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. CMOS is designed for clock generator's output. It has been classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 8 bits. The related electronic parts of part number CY25100 are listed below. A 8 pin is available on the clock PLL. Time clock generator can handle a voltage of 3.3V as the supply voltage. In general, this clock PLL is considered a Clock Generators device. 2 signal outputs allow for maximi2ation of output frequency. For the clock time generator to function properly, 25mA of supply current must be provided.
CY25100SXIF Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25100SXIF Applications
There are a lot of Cypress Semiconductor Corp CY25100SXIF Clock Generators applications.
- Melting
- Digital HDTV systems
- FMCW Radar
- Integrated phase noise in aerospace systems
- Pagers
- Sampling clocks for ADC and DAC
- Frequency synthesis
- CPUs
- Mixed mode (analog and digital) applications
- 1 Gigabit Ethernet
