banner_page

CY25100SXIFT

3.3V Fanout Buffer (Distribution), Spread Spectrum Clock Generator 200MHz CY25100 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3.13V~3.45V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY25100SXIFT
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 588
  • Description: 3.3V Fanout Buffer (Distribution), Spread Spectrum Clock Generator 200MHz CY25100 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3.13V~3.45V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Fanout Buffer (Distribution), Spread Spectrum Clock Generator
Terminal Finish Matte Tin (Sn)
Subcategory Clock Generators
Voltage - Supply 3.13V~3.45V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY25100
Output CMOS
Pin Count 8
Number of Outputs 2
Operating Supply Voltage 3.3V
Number of Circuits 1
Nominal Supply Current 35mA
Frequency (Max) 200MHz
Input CMOS, Crystal
Ratio - Input:Output 1:2
Primary Clock/Crystal Frequency-Nom 166MHz
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY25100SXIFT Overview


Clock ICs are packaged using the Tape & Reel (TR) method. As part of the 8-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 8 terminations to be found. This time clock generator should be voltaged at 3.3V. As the Clock PLL's input, CMOS, Crystal is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. A clock-based RF synthesizer that provides a max frequency of 200MHz is available. The Surface Mount allows this electrical component to be easily installed on the panel. In terms of supply voltage, RF synthesizer works with 3.13V~3.45V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator component. It is a 8-bit IC that is designed for microprocessors specifically. The related electrical components for the base part number CY25100 can be found below. There is a 8 pin that is available on the frequency synthesizers. The maximum supply voltage that analog clock generator can handle is 3.3V. Fundamentally, this is a kind of Clock Generators clock PLL. 2 signal outputs maximi2e the output frequency.

CY25100SXIFT Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY25100SXIFT Applications


There are a lot of Cypress Semiconductor Corp CY25100SXIFT Clock Generators applications.

  • Notebooks
  • 10 Gigabit Ethernet
  • Modems
  • Computers to manage memory cards
  • Small signal recovery
  • Electronic countermeasures
  • Wi-Fi routers
  • DVD add-on cards for multimedia PCs
  • Clock signals to the high-speed Digital RF circuits
  • Tracking filters

Write a review

Note: HTML is not translated!
    Bad           Good