banner_page

CY25100ZXCF

Fanout Buffer (Distribution), Spread Spectrum Clock Generator 200MHz CY25100 Clock Generators 8-TSSOP (0.173, 4.40mm Width) Surface Mount 3.13V~3.45V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY25100ZXCF
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 531
  • Description: Fanout Buffer (Distribution), Spread Spectrum Clock Generator 200MHz CY25100 Clock Generators 8-TSSOP (0.173, 4.40mm Width) Surface Mount 3.13V~3.45V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Supplier Device Package 8-TSSOP
Operating Temperature 0°C~70°C
Packaging Tube
Published 2003
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Type Fanout Buffer (Distribution), Spread Spectrum Clock Generator
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 3.13V~3.45V
Base Part Number CY25100
Output CMOS
Number of Outputs 2
Operating Supply Voltage 3.3V
Number of Elements 1
Number of Circuits 1
Max Supply Voltage 3.45V
Min Supply Voltage 3.13V
Nominal Supply Current 35mA
Frequency (Max) 200MHz
Input CMOS, Crystal
Ratio - Input:Output 1:2
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

CY25100ZXCF Overview


As a clock IC, it is packaged by the Tube method. The 8-TSSOP (0.173, 4.40mm Width) package contains this clock generator. As the Clock PLL's input, CMOS, Crystal is designed to be used in order to generate the clock signal. There are 1 circuits implemented in order to achieve full performance from this electronic part. An up to 200MHz frequency is provided by this clock-based RF synthesizer. With the Surface Mount, it is easy to install this electric component on the panel. Clock generator ic works with 3.13V~3.45V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. A frequency synthesizer which is compatible with the CMOS logic levels is presented here. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator component. According to the base part number, its related parts can be founded. There are 8 pins on the frequency generators that are available for use. The operating temperature should be higher than 0°C. At a temperature of 70°C, the clock generator ic can operate with attenuated performance. Electronic frequency generator can handle voltages up to 3.3V. Clock PLL has 2 signal outputs to maximi2e output frequency. Clock generator operates with the maximal supply voltage of 3.45V. This clock generator ic requires a voltage supply no lower than 3.13V. In this case, we have a 1-element clock PLL that performs well in the absence of jitter.

CY25100ZXCF Features


Available in the 8-TSSOP (0.173, 4.40mm Width)
Operating supply voltage of 3.3V

CY25100ZXCF Applications


There are a lot of Cypress Semiconductor Corp CY25100ZXCF Clock Generators applications.

  • FSK demodulators
  • Mobile telephones
  • Mechanical devices
  • PMR (Professional Mobile Radio)
  • Microwave backhaul IF
  • Camera systems
  • Modems
  • Clock signals to the high-speed Digital RF circuits
  • Simple clock clean-up circuits
  • Digital switching systems

Write a review

Note: HTML is not translated!
    Bad           Good