CY26049ZXC-36
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| Series | Failsafe™, PacketClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer, Clock Generator, Fanout Distribution, Jitter Attenuator |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY26049 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Power Dissipation | 350mW |
| Frequency (Max) | 155MHz |
| Input | Clock |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 18.432MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY26049ZXC-36 Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 16 terminations. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. To access the electronic component's full performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 155MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL works with 3.15V~3.45V supply voltage provided. The temperature should be set at 0°C~70°C to ensure reliable performance. Clock/Frequency Synthesizer, Clock Generator, Fanout Distribution, Jitter Attenuator is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. CY26049 is the base part number for finding related electronic parts. It is possible to connect to the frequency generators via 16 pins. The maximum supply voltage that analog clock generator can handle is 3.3V. This electronic part is a member of the Failsafe?, PacketClock? series. Clock PLL has 3 signal outputs to maximi3e output frequency.
CY26049ZXC-36 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY26049ZXC-36 Applications
There are a lot of Cypress Semiconductor Corp CY26049ZXC-36 Clock Generators applications.
- Carrier synchronization in wired communication
- High-speed communication applications
- Computers to manage memory cards
- Mechanical devices
- Notebooks
- Bluetooth transmitters
- Automatic control system test
- Satellite navigation communication
- Frequency Modulation (FM) stereo decoders
- Various decoding circuits
