CY26049ZXI-36T
| Parameters | |
|---|---|
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | Failsafe™, PacketClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer, Clock Generator, Fanout Distribution, Jitter Attenuator |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY26049 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Supply Current-Max | 45mA |
| Frequency (Max) | 155MHz |
| Input | Clock |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 18.432MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY26049ZXI-36T Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. This clock generator ic should receive a voltage of 3.3V. In this case, Clock is designed to be the input of the clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. An up to 155MHz frequency is provided by this clock-based RF synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3.15V~3.45V. The temperature should be set at -40°C~85°C to ensure reliable performance. This electronic component can be classified as a Clock/Frequency Synthesizer, Clock Generator, Fanout Distribution, Jitter Attenuator. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number, its related parts can be founded. A 16 pin is available on the PLL. The supply voltage should be maintained at 3.3V for high efficiency. This clock generator is a member of Failsafe?, PacketClock? series. 3 signal outputs enable clock PLL to magnify output frequency as high as possible. A supply current exceeding 45mA may cause an element to melt.
CY26049ZXI-36T Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY26049ZXI-36T Applications
There are a lot of Cypress Semiconductor Corp CY26049ZXI-36T Clock Generators applications.
- Microprocessor clock multipliers
- Radar
- Antenna automatic tracking
- Sampling clocks for ADC and DAC
- Walkie-talkies
- Media broadcast servers
- Signal analyzer
- Camera systems
- Digital logic circuits
- Clock signals to the high-speed Digital RF circuits
