CY26580KOI-2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| Series | PacketClock™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution, Multiplexer |
| Voltage - Supply | 3.14V~3.47V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | CY26580 |
| Output | Clock |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 50mA |
| Frequency (Max) | 133.33MHz |
| Input | CMOS |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 125MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 8.6487mm |
| Width | 3.8989mm |
| RoHS Status | Non-RoHS Compliant |
CY26580KOI-2 Overview
In order to package it as a clock IC, the Tray package is used. Embedded in the 20-SSOP (0.154, 3.90mm Width) package is this Clock PLL. As a result, frequency synthesizers can be found to contain 20 terminations. For this clock generator ic, a voltage of 3.3V is required. It is designed that the Clock PLL's input should be CMOS. To access the electronic component's full performance, 1 circuits are implemented. It provides a maximum frequency of 133.33MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generator ic works with 3.14V~3.47V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. As the name suggests, this is a clock generator that is compatible with Clock logic levels. This electronic component can be classified into Clock Generator, Fanout Distribution, Multiplexer. Clock PLL is equipped with 20 pin count. This part number CY26580 is related to the following electrical components. There are 20 pins that are available on the frequency generator. The maximum supply voltage that analog clock generator can handle is 3.3V. An electronic part belonging to the PacketClock? series is being used here.
CY26580KOI-2 Features
Available in the 20-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY26580KOI-2 Applications
There are a lot of Cypress Semiconductor Corp CY26580KOI-2 Clock Generators applications.
- Infotainment systems
- Integrated phase noise in aerospace systems
- Walkie-talkies
- Modems
- Bit synchronization
- FSK demodulators
- 10 Gigabit Ethernet
- Mixed mode (analog and digital) applications
- 1 Gigabit Ethernet
- Signal demodulation
