CY62256NLL-70PXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | MoBL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | SRAM - Asynchronous |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CY62256 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Memory Size | 256Kb 32K x 8 |
| Number of Ports | 1 |
| Nominal Supply Current | 50mA |
| Memory Type | Volatile |
| Memory Format | SRAM |
| Memory Interface | Parallel |
| Organization | 32KX8 |
| Output Characteristics | 3-STATE |
| Write Cycle Time - Word, Page | 70ns |
| Address Bus Width | 15b |
| Density | 256 kb |
| Standby Current-Max | 0.000005A |
| Access Time (Max) | 70 ns |
| I/O Type | COMMON |
| Sync/Async | Asynchronous |
| Word Size | 8b |
| Standby Voltage-Min | 2V |
| Height | 5.08mm |
| Length | 37.59mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY62256NLL-70PXC Overview
As far as its memory type goes, it falls into the Volatile category. It comes in a Tube. Embedded in the 28-DIP (0.600, 15.24mm) case, memory ics is a single file. This chip has an 256Kb 32K x 8 size of memory on it, so a lot of data can be stored on it. The device uses a mainstream SRAM-format memory. Featuring an extended operating temperature range of 0°C~70°C TA, this device allows it to be used in a variety of demanding applications. The supply voltage can be up to 4.5V~5.5V. The recommended mounting type for memory ics is Through Hole. The chip is terminated with 28 terminations. In total, this part supports 1 functions. Memory devices such as this one are designed to be powered by 5V and should be used as such. CY62256, as the device's base part number, is frequently referred in order to select similar parts. It is encased in an 28-pin package that contains this ic memory chip. It has 28 pins indicating it has 28 memory locations. There is a note stating that this memory chip operates at 5V. The memory chip utilizes a straightforward, high-efficiency mounting method, Through Hole mounting. As far as its nominal supply current is concerned, this memory component carries a rating of 50mA. Each memory address is accessed by one of 1 ports on this chip. When it comes to power supplies, this memory chip only requires 5V . An COMMON-bit memory mapped I/O port address is used to address this device. This part plays an important role in applications that target the MoBL? series of memory devices. Using this memory chip, you will be able to process data at a speed of 1MHz times per second.
CY62256NLL-70PXC Features
Package / Case: 28-DIP (0.600, 15.24mm)
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
Freguency at 1MHz
1MHz terminals
CY62256NLL-70PXC Applications
There are a lot of Cypress Semiconductor Corp CY62256NLL-70PXC Memory applications.
- personal computers
- cell phones
- networking
- workstations,
- graphics card
- networks
- Camcorders
- multimedia computers
- nonvolatile BIOS memory
- embedded logic
