Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74FCT |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Additional Feature |
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
HTS Code |
8542.39.00.01 |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74FCT162500 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
18-Bit |
Number of Ports |
2 |
Number of Bits |
18 |
Propagation Delay |
5.6 ns |
Family |
FCT |
Logic Function |
Transceiver |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
24mA 24mA |
Logic Type |
Universal Bus Transceiver |
Max I(ol) |
0.024 A |
Prop. Delay@Nom-Sup |
5.1 ns |
Trigger Type |
NEGATIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height Seated (Max) |
2.79mm |
Width |
7.49mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT162500ATPVC Overview
There is an embedded version of it in the 56-BSSOP (0.295, 7.50mm Width) package. Tube is the way it is packaged. A 18-Bit-circuit is used to provide its superior flexibility. There is a logic type Universal Bus Transceiver associated with this electrical device. A Surface Mount-shaped electronic component is mounted here. Over -40°C~85°C, the operating temperature should be higher. High/Low output currents allow 24mA 24mA to have a maximum design flexibility. FPGAs in the 74FCT series are this type. The supply voltage for the machine is 4.5V~5.5V and it operates on that voltage. The 74FCT162500 family is the one that this is part of. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to function normally, the supply voltage should be higher than 5V. The pin count is 56. In order to design this electronic part, 18 Bits have been used. 2 terminations, on the other hand, are the practice of terminating a transmission line with a device that matches its characteristic impedance. In this case, the electronic part is mounted in the direction of Surface Mount. 56 pins are used in the design of this board. It is a FCT-family electronic device. It reaches 5.5V when the maximum supply voltage (Vsup) is reached. A higher voltage supply (Vsup) should be used. 5V power supplies power it. There is a trigger configured with NEGATIVE EDGE. It is also characterized by WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION as another characteristic.
CY74FCT162500ATPVC Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
74FCT162500 family
56 pin count
56 pins
5V power supplies
CY74FCT162500ATPVC Applications
There are a lot of Texas Instruments CY74FCT162500ATPVC Universal Bus Functions applications.
- MPPT function (maximum power point tracking)
- Residual current/leakage current protection
- CMOS circuitry
- Grid adaptation function
- Digital camera
- Electrical tools
- Illumination
- Refrigerator
- Reactive power compensation function
- Agriculture and light complementary power station