CY7B9911V-5JXCT
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | RoboClock+™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Subcategory | Clock Drivers |
| Technology | TTL |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B9911 |
| Pin Count | 32 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 95mA |
| Power Dissipation | 104mW |
| Frequency (Max) | 110MHz |
| Family | 7B |
| Input | LVTTL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.035 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.7 ns |
| Height Seated (Max) | 3.556mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B9911V-5JXCT Overview
The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 32-LCC (J-Lead) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 32 terminations can be found in frequency generators. Clock generator ics require a voltage of 3.3V. A clock generator's input is called LVTTL and it is designed as the input for this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 110MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 3.63V. There should be a voltage supply above 2.97V for this frequency generator in order to ensure its safety. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 32-bit IC that is designed for microprocessors specifically. You can find related electrical components to the base part number CY7B9911. There is a 32 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. Clock Drivers-type frequency generators are usually classified as this type. The RoboClock+? series includes this electronic part. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.7 ns Max, this clock generator offers low timing skew. This clock generator belongs to the family of 7B.
CY7B9911V-5JXCT Features
Available in the 32-LCC (J-Lead)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B9911V-5JXCT Applications
There are a lot of Cypress Semiconductor Corp CY7B9911V-5JXCT Clock Generators applications.
- Test equipment
- Carrier synchronization in wired communication
- Mixed mode (analog and digital) applications
- Signal demodulation
- Televisions
- Integrated phase noise in aerospace systems
- Ultrasound diagnosis
- Wireless infrastructure
- Cable television converter boxes
- Electronic countermeasures
