CY7B993V-2AXC
| Parameters | |
|---|---|
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B993 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Propagation Delay | 200 ps |
| Frequency (Max) | 100MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B993V-2AXC Overview
The Tray method is used for packaging clock ICs. In the 100-LQFP package, there is an embedded clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are 100 terminations found in this file. The supply voltage of 3.3V allows for high efficiency. As the Clock PLL's input, LVPECL, LVTTL is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. An up to 100MHz frequency is provided by this clock-based RF synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. 3.63V would be the maximum supply voltage for this clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. There are 2.97V~3.63V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at 0°C~70°C to ensure reliable performance. The frequency synthesizer in this product is compatible with all levels of LVTTL logic. This electronic component can be classified as a Clock Buffer, Fanout Distribution. Clock PLL is equipped with 100 pin count. The related electrical components for the base part number CY7B993 can be found below. There are 100 pins on the frequency generators that are available for use. In terms of the supply voltage, analog clock generator can handle 3.3V volts. As such, it is often referred to as a kind of Clock Drivers clock PLL. The RF synthesizer features CONFIGURABLE AS SINGLE ENDED TTL ALSO for improved clock signal output. There are a number of electronic parts in the RoboClock? series, including this one. 18 signal outputs maximi18e the output frequency. There is a low timing skew at 0.5 nsmax with this RF synthesizer. The 7B family of parts can be used to find electronic parts that are similar to each other.
CY7B993V-2AXC Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B993V-2AXC Applications
There are a lot of Cypress Semiconductor Corp CY7B993V-2AXC Clock Generators applications.
- Mechanical devices
- Automatic test equipment
- Coherent detection of the signal
- Local oscillator source in receiver
- 10 Gigabit Ethernet
- FM demodulation networks for FM operations
- Automatic control system test
- Closed circuit systems
- Line cards used in telephone exchange
- Set-top boxes
