CY7B994V-2AXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Propagation Delay (tpd) | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-2AXI Overview
In order to package it as a clock IC, the Tray package is used. 100-LQFP contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 100 terminations can be found in frequency generators. Clock generator ics require a voltage of 3.3V. LVPECL, LVTTL is designed for clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 3.63V to operate this time clock generator. Keeping the supply voltage for this frequency synthesizer above 2.97V is recommended for safety reasons. As long as you provide 2.97V~3.63V supply voltage, it will work. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVTTL logic levels are supported by this RF synthesizer. An electrical part such as this one can be classified as a Clock Buffer, Fanout Distribution component. Clock PLL is equipped with 100 pin count. The related electrical components for the base part number CY7B994 can be found below. There is an available 100 pin on the clock generators. In terms of the supply voltage, analog clock generator can handle 3.3V volts. As a result, it is commonly classified as a type of Clock Drivers clock PLL. There is a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature on this frequency generator in order to produce a better clock signal. A member of the RoboClock? series, this electronic component is made of plastic. Clock PLL has 18 signal outputs to maximi18e output frequency. The maximal same edge skew (tskwd) can not be exceeded. A search for the 7B family will yield similar electronic parts.
CY7B994V-2AXI Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2AXI Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-2AXI Clock Generators applications.
- Bluetooth transmitters
- Test and instrumentation equipment
- Local oscillator source in receiver
- Wireless base station for LTE, LTE-advanced
- Clock synchronization
- CB radios
- Digital HDTV systems
- Tracking filters
- Computers to manage memory cards
- Automatic control system test
