Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LBGA |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
220 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
CY7B994 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Max Supply Current |
250mA |
Propagation Delay |
200 ps |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.03 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.5 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.8 ns |
Height |
890μm |
Length |
11mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
CY7B994V-2BBI Overview
Clock generator is packaged in the way of Tray. The 100-LBGA package includes this clock generator. This clock generator ic can sustain a maximum temperature of 220 during reflowing. 100 terminations can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 3.3V. It is designed that the Clock PLL's input should be LVPECL, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. Because of the Surface Mount, clock PLL can be easily mounted on the panel. The maximal supply voltage this clock generator would take is 3.63V. In order to maintain safety, this frequency generator should be supplied with voltages above 2.97V. In terms of supply voltage, RF synthesizer works with 2.97V~3.63V. The temperature should be set at -40°C~85°C to ensure reliable performance. There are several logic levels in LVTTL logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock Buffer, Fanout Distribution. It is a 100-bit IC that is designed for microprocessors specifically. It is possible to find its related electronic parts by searching for the base part number CY7B994. There are 100 pins on the frequency generators that are available for use. There is a maximum supply voltage of 3.3V that clock generator can handle. The clock PLL is generally classified as a Clock Drivers device. There is a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature on this frequency generator in order to produce a better clock signal. RoboClock? series electronic parts are used in this part. The output frequency is magnified as high as possible with 18 signal outputs. At 0.8 ns Max, this analog clock generator exhibits low timing skew. A search for the 7B family will yield similar electronic parts. This clock generator operation can supply up to 250mA of current.
CY7B994V-2BBI Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2BBI Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-2BBI Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Laptops
- Mixed mode (analog and digital) applications
- Set-top boxes
- Communication infrastructure
- Medical equipment
- Remote telemetry and instrumentation
- Instrument
- High-frequency induction heating
- Signal generator