CY7B994V-5BBXC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 100 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.65 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-5BBXC Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. This clock generator is embedded in the 100-LBGA package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 100 terminations in this file. This time clock generator should be voltaged at 3.3V. In this clock generator, LVPECL, LVTTL is used as the input to the clock. For full access to the electronic component's capabilities, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 200MHz Max. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 3.63V is the maximum supply voltage needed by this time clock generator. A maximum voltage of 2.97V should be used for this frequency generator for safety reasons. As long as you provide 2.97V~3.63V supply voltage, it will work. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. It's compatible with LVTTL logic levels. This electronic component can be classified into Clock Buffer, Fanout Distribution. An IC that generates clocks specifically for microprocessors, this clock PLL is 100-bits in si100e. According to the base part number CY7B994, its related parts can be found. There are 100 pins that are available on the frequency generator. The supply voltage should be maintained at 3.3V for high efficiency. Fundamentally, this is a kind of Clock Drivers clock PLL. For better clock signal output, this clock PLL is featured with CONFIGURABLE AS SINGLE ENDED TTL ALSO. This clock generator is a member of RoboClock? series. There is a low timing skew at 0.65 nsmax with this RF synthesizer. When searching for parts of the 7B family, similar electronic components will be found.
CY7B994V-5BBXC Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBXC Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5BBXC Clock Generators applications.
- Frequency synthesis
- Automatic control
- Notebooks
- Automatic control system test
- GPS systems
- Phase modulation cellular systems
- Symbol synchronization
- Infotainment systems
- Threshold extension
- Laptops
