CY8C3246LTI-125
| Parameters | |
|---|---|
| Bit Size | 8 |
| Data Converter | A/D 16x12b; D/A 1x8b |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| ROM (words) | 65536 |
| EEPROM Size | 2K x 8 |
| Boundary Scan | YES |
| Number of Programmable I/O | 31 |
| RAM (words) | 8000 |
| Bus Compatibility | I2C; USB |
| Number of GPIO | 25 |
| UV Erasable | N |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 150.507618mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | PSOC® 3 CY8C32xx |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | 3A991.A.3 |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY8C3246 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 1.8/5V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Interface | EBI/EMI, I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~5.5V |
| Core Processor | 8051 |
| Peripherals | CapSense, DMA, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | EBI/EMI, I2C, LINbus, SPI, UART/USART, USB |
CY8C3246LTI-125 Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. This item can be found in package Tray. There is a 8051 as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. There is FLASH program memory in it. There are 38 I/Os on the board. Other components that are comparable to it have the base part number CY8C3246. At QUAD, it has its terminals. There are a total of 48 terminations in it. Part of the PSOC? 3 CY8C32xx series, this electrical component is used in a variety of applications. The supply voltage of 3.3V allows for high efficiency. A number of 48 pins are used to construct it. It has a total of 48 pins on it. It falls under the category of Other uPs/uCs/Peripheral ICs. In order to store data and programs, the devices have a memory size of 64kB. A 1.8/5V source of power is being used to run it. It performs extremely well at a frequency of 50MHz. There are 4 timers/counters. A chip with 31 programmable inputs/outputs is available. Normal operation requires a supply voltage (Vsup) that is higher than 1.71V. There is an oscillator type Internal used in this circuit.
CY8C3246LTI-125 Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Other uPs/uCs/Peripheral ICs subcategory
CY8C3246LTI-125 Applications
There are a lot of Cypress Semiconductor Corp CY8C3246LTI-125 Microcontroller applications.
- Data acquisition and control
- Calculator
- Food and beverage
- Sonography (Ultrasound imaging)
- Electromechanical control
- Smart instruments
- Laminators
- Ipod
- Answering machines
- Blenders
