DG528AK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-CDIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Supplier Device Package | 18-CERDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 400Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 900mW |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Max Supply Current | 2.5mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 24Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.94mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DG528AK Overview
This electronic part is conveniently packaged in 18-CDIP (0.300, 7.62mm), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Through Hole. Multiplexer and demultiplexer circuits have a number 8:1. Around -55°C~125°C TA is the extended operating temperature. The electronic part provides high-quality output because it has 1 channels. The multiplexer consists of 1 circuits. Internally, this switch multiplexer has a resistance of 400Ohm. The datasheets for the 18 pins explain the functions. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 13V should be applied to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 2.5mA. Despite this switch's dual supply capability, its voltage should not exceed 22V. 15V operating voltages can be used with this electrical part. During operation, the multiplexer should not be exposed to a temperature above 125°C. There is a 18-CERDIP package available from suppliers.
DG528AK Features
1 Channels
DG528AK Applications
There are a lot of Vishay Siliconix DG528AK Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Fault Tolerant Systems
- SONET
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microprocessor controlled systems
- Power routing
- Audio and video switching
- Relay replacements
- ISDN NT1/TA
- Precision instrumentation
