DG9409DN-T1-E4
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 1.88W |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Propagation Delay | 71 ns |
| Turn On Delay Time | 162 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 97 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 7Ohm |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 81 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 112pF |
| On-state Resistance Match-Nom | 3.6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 70ns, 44ns |
| Charge Injection | 29pC |
| Channel-to-Channel Matching (ΔRon) | 3.6 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.1A |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 57.09594mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.88W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG9409 |
| Pin Count | 16 |
DG9409DN-T1-E4 Overview
Packed in 16-VQFN Exposed Pad, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SP4T switching circuits. It consists of 2 circuits. Using the DG9409 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 7Ohm. You can find the functions of the 16 pins in the datasheets. Users shouldn't supply more than 12V voltage to the switch device. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 2.7V. 1μA current would be enough for this multiplexer to operate. Putting voltage greater than 1μA on the multiplexer may cause damage. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 3V voltage attached. The electrical component supports 8 inputs.
DG9409DN-T1-E4 Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
DG9409DN-T1-E4 Applications
There are a lot of Vishay Siliconix DG9409DN-T1-E4 Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- High reliability control systems
- Industrial and process control systems
- Switching Systems
- Avionics test equipment
- Mechanical reed relay replacement
- Battery Powered Instruments
- Cable Modem
- RGB switches
- Low-Voltage
