DK1A1B-12V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | Silver Nickel (AgNi) |
| Contact Plating | Gold, Silver |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Number of Pins | 6 |
| Weight | 6g |
| Operating Temperature | -40°C~65°C |
| Packaging | Tube |
| Published | 2004 |
| Series | DK |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | PC Pin |
| ECCN Code | EAR99 |
| Terminal Finish | Gold Flash (Au) |
| Additional Feature | RELEASE TIME WITHOUT DIODE |
| Power Rating | 200mW |
| Voltage - Rated DC | 125V |
| Depth | 15mm |
| Current Rating | 8A |
| Reference Standard | CSA; TUV; UL; VDE |
| Termination Style | PC Pin |
| Voltage - Rated AC | 250V |
| Approval Agency | CSA, TUV, UL, VDE |
| Contact Current(DC)-Max | 8A |
| Max Voltage Rating (AC) | 250V |
| Max Current Rating | 8A |
| Number of Poles | 1 |
| Throw Configuration | DPST, SPST |
| Max Voltage Rating (DC) | 125V |
| Contact Form | DPST-NO/NC (1 Form A, 1 Form B) |
| Relay Type | General Purpose |
| Contact Current(AC)-Max | 8A |
| Coil Resistance | 720Ohm |
| Contact (AC) Max Rating R Load | 8A@250VAC |
| Operate Time | 10ms |
| Coil Voltage | 12VDC |
| Coil Type | Non Latching |
| Switching Voltage | 250VAC 125VDC -Max |
| Coil Current | 16.7mA |
| Release Time | 8ms |
| Must Operate Voltage | 8.4VDC |
| Power Consumption | 200mW |
| Coil Power | 200mW |
| Must Release Voltage | 1.2VDC |
| Contact/Output Supply Type | AC/DC |
| Relay Action | MOMENTARY |
| Coil Voltage (DC) | 12V |
| Coil/Input Supply Type | DC |
| Seal Rating | Sealed - Fully |
| Switching Current | 8A |
| Switching Capacity | 2 kW |
| Height | 10mm |
| Length | 20mm |
| Width | 15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
See Relate Datesheet
