DM385AAAR01F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 609-LFBGA, FCBGA |
| Number of Pins | 609 |
| Operating Temperature | 0°C~95°C TJ |
| Packaging | Tray |
| Series | DM38x DaVinci™ Video SOC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 609 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 720MHz |
| Base Part Number | DM385 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Power Supplies | 1.14/1.42V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Interface | I2C, IrDA, Ethernet, McASP, PCI, SD, SPI, UART/USART, USB |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 8192 |
| Voltage - I/O | 1.35V 1.5V 1.8V 3.3V |
| Number of UART Channels | 3 |
| Non-Volatile Memory | ROM (48kB) |
| Voltage - Core | 1.1V 1.2V 1.35V |
| On Chip Data RAM | 640kB |
| Length | 16mm |
| Width | 16mm |
| Thickness | 980μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM385AAAR01F Overview
In the 609-LFBGA, FCBGA package, it is a type of electronic component.There is a packaging method of Tray provided with it.As a member of Digital Media System-on-Chip (DMSoC), it is ideally suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.Keeping the device at the temperature of 0°C~95°C TJ will ensure that it runs as it should.Voltages can be input or output within 1.35V 1.5V 1.8V 3.3V's analog voltage range.The DM38x DaVinci? Video SOC series includes this digital signal processor.In order to use it, it has 609 terminations.The voltage supplied by 1.2V is used to operate it.609 pins can be found in its configuration.Based on its base part number of DM385, many ralated parts can be found.In order for the device to operate at the frequency of 720MHz, it has been designed specifically.In order to mount it, it utiliSurface Mountes the Surface Mount method.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.1.14/1.42V electric power supplies the facility.The 3 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.
DM385AAAR01F Features
Supplied in the 609-LFBGA, FCBGA package
DM385AAAR01F Applications
There are a lot of Texas Instruments DM385AAAR01F DSP applications.
- Electronic information engineering
- Fourier transform
- Radar
- Geoscience signal processing
- Smart phones
- Infinite impulse response filters
- Boats
- Statistical signal processing
- Image compression
- House construction
