DM74ALS174N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 50MHz |
| Base Part Number | 74ALS174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 6 |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 400μA 8mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS174N Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Through Holeis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74ALS series. It should not exceed 50MHzin its output frequency. The list contains 1 elements. As a result, it consumes 19mA quiescent current. This D latch belongs to the family of 74ALS174. There is an electronic part mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 6. In order to achieve its superior flexibility, 7 circuits are used. If high efficiency is desired, the supply voltage should be kept at 5V. There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. In this case, the high level output current is set to -400μA. 8mAis set as the low level output current. A temperature below 70°Cshould be used for operation. The operating temperature should be higher than 0°C. The minimal supply voltage is 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. We are able to achieve a frequency of 50MHz.
DM74ALS174N Features
Tube package
74ALS series
16 pins
6 Bits
DM74ALS174N Applications
There are a lot of ON Semiconductor DM74ALS174N Flip Flops applications.
- Cold spare funcion
- Individual Asynchronous Resets
- Common Clocks
- Parallel data storage
- High Performance Logic for test systems
- ATE
- ESD protection
- Guaranteed simultaneous switching noise level
- Balanced 24 mA output drivers
- Shift registers
