DRV101TG3
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV101 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Bipolar |
| Operating Supply Voltage | 24V |
| Interface | On/Off |
| Current - Output (Max) | 1.9A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Collector Emitter Voltage (VCEO) | 60V |
| Max Collector Current | 2.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.3A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.6mm |
| Length | 10.16mm |
| Width | 8.34mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV101TG3 Overview
As a result, it is packaged in the form of a Tube.It's included in the TO-220-7 (Formed Leads) package.This LED driving board is mounted using the mounting type Through Hole.Relay, Solenoid Driver is the switch type it owns.It is recommended that the temperature be set to -55°C~125°C TA for reliable performance.By default, it is set to output 1.The LED driving board operates at Not Required volts.There is a maximum output voltage of Bipolar volts.There are Internal PWM, Status Flag features available on the LED driving board.The DRV101 family contains this object.A total of 7 terminations can be found in it.For operation, we use the 7 pins.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 1.9AV.The supply voltage can be 24V for high efficiency.In total, it has 3 pins.As a result, the output current is set to 2.3A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.When using this LED driving board, it is recommended that the supply voltage is set to 24V.
DRV101TG3 Features
Supplied from 24V
DRV101TG3 Applications
There are a lot of Texas Instruments DRV101TG3 Power Switches ICs applications.
- Notebook and Tablet Computers
- Mobile Communication Devices
- Low Voltage I/O System Power
- Set-top-box
- Wireless Headsets
- Portable GPS Device
- Notebook PC
- Solid-State Drives
- PDAs
- HDD, SSD
