DRV8312DDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TSSOP (0.244, 6.20mm Width) Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | DRV8312 |
| Pin Count | 44 |
| Number of Outputs | 3 |
| Output Voltage | 5V |
| Operating Supply Voltage | 12V |
| Power Supplies | 1250V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 12mA |
| Output Configuration | Half Bridge (3) |
| Output Current | 3.5A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 3.5A |
| Voltage - Load | 0V~52.5V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 80m Ω LS, 80m Ω HS |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 500kHz |
| Motor Type | Brushless DC (BLDC) |
| Ambient Temperature Range High | 85°C |
| Current - Peak Output | 6.5A |
| Load Type | Inductive |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8312DDW Overview
For packaging, it is used with Tube.A cost-saving measure, H bridge is included in 44-TSSOP (0.244, 6.20mm Width) Exposed Pad.Based on 10.8V~13.2V, improved reliabilbridge drivery can be achieved.H bridge circuit is put into place in the way of Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose as well.In order to mount H gate on the PCB, Surface Mount is used.As H bridge ic of its specific characteristics, it also possesses Bootstrap Circuit, Status Flag.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 44 terminations are employed.It is used as a pronged contact as H bridge ic of a signal interface when 44 pins are used.The DRV8312 base H bridge ic number is the key to finding more related H bridge ics.To operate H bridge circuit, a voltage supply of 12V is required.As its analog IC type, H bridge circuit has been incorporated with BRUSH DC MOTOR CONTROLLER.Output reaches 6.5A at the maximum current.There is 3.5A current flowing through the output and power supply pins.A number of 44 pins work together to provide this bridge driver with its specific functions.The Hbridge has 3 outputs.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.It is important to maintain the operating supply voltage at 12V in order to ensure high efficiency.Hbridge 5V releases voltage.An electrical load is supplied with power from 1250V.
DRV8312DDW Features
Available in 44-TSSOP (0.244, 6.20mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8312
Subcategory: 6.5A
Number of Receivers: 12V
DRV8312DDW Applications
There are a lot of Texas Instruments DRV8312DDW Full Bridge Drivers, Half-Bridge Drivers applications.
- V-Core
- CD players
- Industrial Fans
- Bipolar stepper motor
- Voltage Regulators for GPUs
- Voltage Regulators for CPUs
- Telecom Microprocessor
- Compact Blade Servers
- Industrial Automation
- Non-V-Core
