DRV8412DDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TSSOP (0.244, 6.20mm Width) Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, Stepper Motors |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 50V |
| Terminal Pitch | 0.635mm |
| Frequency | 500kHz |
| Base Part Number | DRV8412 |
| Pin Count | 44 |
| Number of Outputs | 2 |
| Output Voltage | 200mV |
| Max Output Current | 6A |
| Operating Supply Voltage | 50V |
| Interface | PWM |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 9mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 14A |
| Output Current per Channel | 3A |
| Voltage - Load | 0V~52.5V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 110m Ω LS, 110m Ω HS |
| Load Type | Inductive |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8412DDWR Overview
Packaged using Tape & Reel (TR).For cost-saving purposes, H bridge is included in the 44-TSSOP (0.244, 6.20mm Width) Exposed Pad package.The supply voltage 10.8V~13.2V has the capabilbridge drivery of improving reliabilbridge drivery.H bridge circuit is put into place according to the way of Surface Mount.When -40°C~150°C TJ is operating at a certain temperature, motor driver H bridge can function normally.H bridge motor driver can be used for a variety of purposes, including DC Motors, Stepper Motors.Using Surface Mount, the board is mounted.Status Flag is one of full bridges specific characteristics.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 44 termination.Signal interfaces include 44 pins that serve as pronged contacts.The base H bridge ic number of DRV8412 allows you to find more related H bridge ics by using that number.H bridge circuit operates on a voltage of 50V.STEPPER MOTOR CONTROLLER has been incorporated as H bridge circuit's analog IC type.An ambient temperature of 6A determines the maximum load current that a power supply can deliver.The output pins and the power supply pins are conducting 14A current.It is through 44 pins that this bridge driver is able to perform its specific functions.There is a 2 output on it.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 50V.Hbridge 200mV releases voltage.
DRV8412DDWR Features
Available in 44-TSSOP (0.244, 6.20mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8412
Number of Receivers: 50V
DRV8412DDWR Applications
There are a lot of Texas Instruments DRV8412DDWR Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Fans
- Voltage Regulators for CPUs
- VTR
- Optical disc drives
- Voltage Regulators for GPUs
- Notebook Computers
- Compact Blade Servers
- V-Core
- Industrial Pumps
- Telecom Microprocessor
