DRV8601DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Haptic Feedback |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8601 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1.7mA |
| Output Configuration | Differential |
| Current - Output | 400mA |
| Quiescent Current | 1.7mA |
| Min Input Voltage | 1.15V |
| Logic Function | AND |
| Max Input Voltage | 500mV |
| Supply Current-Max (Isup) | 2mA |
| Voltage - Load | 2.5V~5.5V |
| Motor Type - AC, DC | ERM, LRA |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8601DRBR Overview
The design includes a package of type [0].This part is packed in a 8-VDFN Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.I believe it would be suitable for the component connected to Haptic Feedback.In this case, the device can supply 2.5V~5.5V volts.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.A motor of this type can be categorized as ERM, LRA.The part supports 8terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Please take in mind that this amplifier should be run at 3.3V.The output current should be kept at 400mA for the part.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.Drivers controllers is based on the DRV8601 part number.This device is designed with a pin count of 8.This is part of the Motion Control Electronics series.In this case, 5.5Vis maintained as the output voltage.
DRV8601DRBR Features
Applications : Haptic Feedback
Load voltage across the chip 2.5V~5.5V
base on DRV8601 number
DRV8601DRBR Applications
There are a lot of Texas Instruments DRV8601DRBR motor drivers applications.
- Architectural lighting
- parking lights
- Indicator
- General lighting
- Side marker lights
- Accurate LED current matching
- Multiple output capability
- Outdoor area lights
- Dash
- Dome
