DRV8801RTYT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~38V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 32V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8801 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Operating Supply Voltage | 32V |
| Supply Voltage-Max (Vsup) | 38V |
| Power Supplies | 8/38V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 2.8A |
| Quiescent Current | 3.2mA |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 1.8A |
| Voltage - Load | 8V~38V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8801RTYT Overview
This package was designed with Tape & Reel (TR)in mind.This part is packed in a 16-WQFN Exposed Pad case.Ideally, the part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.There is a possibility of providing 8V~38Vvolts through the device.Operation temperature ranges from -40°C~150°C TJ.A motor of this type can be categorized as Brushed DC.The part has 16terminations available.The voltage can applied to the load at the rate of 8V~38V.Drivers controllers is important to remember that this amplifier should be run at 32V.There is Surface Mount recommended mounting method for this device.Maintain a current of 2.8Afor the part output.The device utilizes the IC BRUSH DC MOTOR CONTROLLERwhich is an analog IC.The DRV8801part number is used to locate the part.16pins are used in its design.Drivers controllers belongs to the Motion Control Electronics series.There are 1 outputs available.The driver is powered by a 32Vvolt supply.Drivers controllers is maintained at 400mV volts.A motor type of Brushedcan be recognized.
DRV8801RTYT Features
Applications : General Purpose
Load voltage across the chip 8V~38V
base on DRV8801 number
designed with 1 outputs
Motor Type classified as Brushed
DRV8801RTYT Applications
There are a lot of Texas Instruments DRV8801RTYT motor drivers applications.
- Outdoor area lights
- Side marker lights
- Automotive exterior and interior lighting
- LED ballasts
- Display LED backlighting
- parking lights
- Large outdoor LED display
- Camera-enabled smartphones
- Handheld devices
- High brightness LED lighting
