DRV8810PAP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| Operating Temperature | 0°C~120°C TJ |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 7V~40V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 27V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8810 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 32V |
| Operating Supply Voltage | 27V |
| Supply Voltage-Min (Vsup) | 18V |
| Interface | SPI |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (8) |
| Current - Output | 800mA |
| Voltage - Load | 18V~40V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/16 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8810PAP Overview
The package is designed with [0].A 64-PowerTQFPcase is included with the part.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.7V~40V volts can be supplied by the device.There is a temperature range of 0°C~120°C TJin which this device operates.A motor of this type can be categorized as Brushed DC.This part offers 64terminations.You can apply voltage at 18V~40Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 27V.Ideally, it should be mounted in the Surface Mountposition.The output current should remain at 800mA.According to the DRV8810part number, the part is found.This device is designed with a pin count of 64.Drivers controllers is part of the series [0].There are 4 outputs available.A supply voltage of 27Vis required to operate this driver.32Vis maintained as the output voltage.A motor type of Steppercan be recognized.
DRV8810PAP Features
Applications : General Purpose
Load voltage across the chip 18V~40V
base on DRV8810 number
designed with 4 outputs
Motor Type classified as Stepper
DRV8810PAP Applications
There are a lot of Texas Instruments DRV8810PAP motor drivers applications.
- Monitoring the energy that the luminaire uses
- Hospitality buildings
- Fog lamps
- Alternative to HID lights
- Building technology
- Multiple output capability
- Hazardous application
- Automotive applications
- Infotainment backlighting
- Architectural lighting
