banner_page

DS1086Z-42M

5V Clock Generator 20.4MHz DS1086 Clock Generators EconOscillator? Series 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 4.75V~5.25V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1086Z-42M
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 119
  • Description: 5V Clock Generator 20.4MHz DS1086 Clock Generators EconOscillator? Series 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 4.75V~5.25V Tube (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2003
Series EconOscillator™
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Clock Generator
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Base Part Number DS1086
Number of Circuits 1
Frequency (Max) 20.4MHz
Input Clock
Ratio - Input:Output 1:1
Primary Clock/Crystal Frequency-Nom 0.4MHz
PLL No
Differential - Input:Output No/No
Divider/Multiplier Yes/No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

DS1086Z-42M Overview


As a clock IC, PLLs is packaged using the Tube method. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. In it, there are 8 terminations to be found. This time clock generator should be voltaged at 5V. In this case, Clock is designed to be the input of the clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. The frequency generator has a maximum frequency of 20.4MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. In terms of supply voltage, RF synthesizer works with 4.75V~5.25V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This electronic component can be classified as a Clock Generator. This part number is related to its related electronic parts. It is possible to connect to the PLL via 8 pins. There is an electronic part in this series that belongs to the EconOscillator? family.

DS1086Z-42M Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V

DS1086Z-42M Applications


There are a lot of Maxim Integrated DS1086Z-42M Clock Generators applications.

  • CB radios
  • Signal analyzer
  • Simple clock clean-up circuits
  • Carrier synchronization in wired communication
  • Satellite navigation communication
  • Multi-function printers
  • Coherent detection of the signal
  • Ports
  • Notebooks
  • Microwave backhaul IF

Write a review

Note: HTML is not translated!
    Bad           Good