banner_page

DS1091LU-66+

3.3V Spread Spectrum Clock Generator DS1091L Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1091LU-66+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 426
  • Description: 3.3V Spread Spectrum Clock Generator DS1091L Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Published 2011
Series EconOscillator™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Spread Spectrum Clock Generator
Terminal Finish Matte Tin (Sn)
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 66.6MHz
Base Part Number DS1091L
Pin Count 8
Operating Supply Voltage 3.3V
Number of Circuits 1
Operating Supply Current 16mA
Input Clock
Ratio - Input:Output 1:1
PLL No

DS1091LU-66+ Overview


As a clock IC, PLLs is packaged using the Tube method. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 8 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be Clock. 1 circuits are used to achieve clock PLL's superior flexibility. With the Surface Mount, it is easy to install this electric component on the panel. There are 3V~3.6V available for use with this clock PLL. The temperature should be set at -40°C~125°C to ensure reliable performance. This electronic component can be classified into Spread Spectrum Clock Generator. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. Related electrical parts can be found for the base part number DS1091L. It is possible to connect to the PLL via 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. This electronic part is a member of the EconOscillator? series. When operated at 66.6MHz, frequency synthesizer achieves high efficiency. For the clock time generator to function properly, 16mA of supply current must be provided.

DS1091LU-66+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

DS1091LU-66+ Applications


There are a lot of Maxim Integrated DS1091LU-66+ Clock Generators applications.

  • Walkie-talkies
  • Melting
  • GPS systems
  • Frequency Modulation (FM) stereo decoders
  • Set-top boxes
  • Multiplexing communication
  • Ports
  • Mobile telephones
  • Infotainment systems
  • Digital switching systems

Write a review

Note: HTML is not translated!
    Bad           Good