DS1210N
| Parameters | |
|---|---|
| Controller Type | Nonvolatile RAM |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DS1210 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 3 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 5mA |
| Memory Type | RAM |
| Adjustable Threshold | NO |
DS1210N Overview
The package contains materials from Tube. The 8-DIP (0.300, 7.62mm) is provided in order to conserve board space. In this case, it is an extremely reliable and high quality type of Nonvolatile RAM. Ideally, the operating temperature should be set at -40°C~85°C. Normal operation of 4.75V~5.5V requires the supply of voltage. Using the Through Hole mounting technique, it is mounted. The base part number DS1210 can be used to locate other similar electronic parts. A 8 termination is used to prevent signals from reflecting off the transmission line's end. A voltage of 5V is used as the supply voltage for the device. The 8 pins are configured on the board. A component's tolerance for high temperatures determines the reflow temperature limit 245. A kind of electronic apart with 8 channels is involved. Listed under the subcategory of Power Management Circuits. The transmission of data is ensured through the use of 3 channels. High efficiency can be achieved using the power supplies of 5V. As an analog IC, it uses the type POWER SUPPLY SUPPORT CIRCUIT. RAM is a type of memory for storing data. Ideally, the supply voltage should be higher than 4.5V. It is possible to supply as much voltage as 5.5V without causing damage to the internal circuit or degradation in characteristics. A device draws current from its supply to provide 5mA.
DS1210N Features
Available in the 8-DIP (0.300, 7.62mm) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C
Operating supply current of 5mA
DS1210N Applications
There are a lot of Maxim Integrated DS1210N Memory Controllers applications.
- Embedded Flash
- Medical Instrumentation and Industrial Products
- Industrial USB Flash Drive
- Disk-on-Board
- Embedded modules including U.2, M.2, MO-297 and MO-300
- NVSRAM Modules
- Servers
- High reliability & industrial Compact FlashTM Cards (CFC)
- Facsimile, Printers and Photocopiers
- eUSB, embedded USB module
