Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2003 |
Series |
MicroMonitor™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
POWER-ON-RESET |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Base Part Number |
DS1831 |
Output |
Open Drain or Open Collector |
Pin Count |
16 |
Number of Channels |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
100μA |
Nominal Supply Current |
80μA |
Max Supply Current |
100μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.3V 5V Adj Adj |
Number of Voltages Monitored |
4 |
Reset Timeout |
10ms; 100ms; 1,000ms Minimum |
Undervoltage Threshold |
2.98V |
Overvoltage Threshold |
3.15V |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DS1831S+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Tube-packaging is used. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 4 channels that can be found. Please find attached 16-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. When a supply voltage of 4 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 16 pins. There are 16 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 100μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. For similar manage ics search of the manufacturer, you can always refer to DS1831, the base PMIC number. A maximum supply temperature of 100μA can be used. As you may know, this PMIC comes from the well-known MicroMonitor? series product line.
DS1831S+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
100μA operating supply current
DS1831S+ Applications
There are a lot of Maxim Integrated DS1831S+ Voltage Supervisors applications.
- Radar
- Computer applications
- Power communication system
- Military electronics
- Efficient information transmission
- Detection of phase imbalance
- Analog circuit
- Insulation fault location system
- FPGA design
- Satellite navigation