banner_page

DS2502+

Through Hole 3 Pin Memory IC DS2502 1 kb kb


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS2502+
  • Package: TO-226-3, TO-92-3 (TO-226AA)
  • Datasheet: PDF
  • Stock: 736
  • Description: Through Hole 3 Pin Memory IC DS2502 1 kb kb (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-226-3, TO-92-3 (TO-226AA)
Number of Pins 3
Weight 453.59237mg
Operating Temperature -40°C~85°C TA
Packaging Bulk
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
Termination Through Hole
ECCN Code EAR99
Additional Feature MICROLAN COMPATIBLE
Subcategory Other Memory ICs
Technology EPROM - OTP
Voltage - Supply 2.8V~6V
Terminal Position BOTTOM
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DS2502
Pin Count 3
Operating Supply Voltage 6V
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2.8V
Interface Serial
Memory Size 1Kb 128 x 8
Operating Supply Current 5μA
Memory Type Non-Volatile
Access Time 15 μs
Memory Format EPROM
Memory Interface 1-Wire®
Organization 128X8
Memory Width 8
Density 1 kb
I/O Type COMMON
Diameter 4.95mm
Height 3.94mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DS2502+ Overview


In terms of its memory type, it can be classified as Non-Volatile. In addition, memory ics is available in a Bulk case as well. TO-226-3, TO-92-3 (TO-226AA) case encloses it. The memory size of the chip is 1Kb 128 x 8 Mb. As with most mainstream devices, this one uses EPROM-format memory. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. There is a voltage range of 2.8V~6V for the supply voltage. The recommended mounting type for memory ics is Through Hole. A total of 3 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to function properly, this ic memory chip should be powered by a voltage of 5V. To select similar parts, many people use the device's base part number DS2502. The memory device is enclosed in a package with an 3-pin connector. This memory device has 3 pins, indicating it has 3 memory locations. This memory runs on an 6V operating supply voltage. Memory chips configured with Through Hole mounting achieve high efficiency and simplicity. Although it has all the merits this chip has, it is also equipped with MICROLAN COMPATIBLE to give a performance boost to the system. A memory mapped I/O port address of COMMON bits is used in this device. There is a common misconception that this component is a type of Other Memory ICs. Ic memory chip is recommended that the device be operated at a supply current of 5μA volts.

DS2502+ Features


Package / Case: TO-226-3, TO-92-3 (TO-226AA)
3 Pins
Operating Supply Voltage:6V
Additional Feature:MICROLAN COMPATIBLE
I/O Type: COMMON

DS2502+ Applications


There are a lot of Maxim Integrated DS2502+ Memory applications.

  • networking
  • Camcorders
  • networks
  • printers
  • eSRAM
  • graphics card
  • personal computers
  • workstations,
  • eDRAM
  • Cache memory

Write a review

Note: HTML is not translated!
    Bad           Good