DS80C390-FCR+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | 80C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS80C390 |
| Pin Count | 64 |
| JESD-30 Code | S-PQFP-G64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.35V |
| Oscillator Type | External |
| Number of I/O | 32 |
| Speed | 40MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3.85V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Power-Fail Reset, WDT |
| Clock Frequency | 40MHz |
| Program Memory Type | ROMless |
| Core Size | 8-Bit |
| Connectivity | CANbus, EBI/EMI, SIO, UART/USART |
| Supply Current-Max | 150mA |
| Bit Size | 8 |
| Has ADC | NO |
| DMA Channels | NO |
| PWM Channels | NO |
| DAC Channels | NO |
| Address Bus Width | 20 |
| External Data Bus Width | 8 |
| Number of UART Channels | 2 |
| ROM Programmability | MROM |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS80C390-FCR+ Overview
Due to its space-saving qualities, it is available in the 64-LQFP package. Surface Mount is used for mounting. It is available in the Tray package. Devices with 8051 core processors are available. It is important to keep the temperature at 0°C~70°C TA while working. ROMless has been assigned to it as a program memory. 32 I/Os can be found on it. To find equivalent components, use its DS80C390 base part number. QUAD is the position of its terminals on the board. Currently, it consists of 64 terminationals. It is a member of the 80C series of electrical components. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. There are 64 pins on it. This component is a part of Microcontrollers. There is a maximum current supply of 150mA. A 5V power source powers it. During the operation of the device, the clock runs at a frequency of 40MHz. Vsup should be kept above 4.35V for normal operation. Using oscillator type External makes it work.
DS80C390-FCR+ Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
DS80C390-FCR+ Applications
There are a lot of Maxim Integrated DS80C390-FCR+ Microcontroller applications.
- Air fryers
- ECG machine
- Telephone sets
- Blood pressure monitors
- Petrochemical
- Playstation
- Smartphones-calling, video calling, texting, email
- Xbox
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Vacuum cleaners
