DS90CR283MTD/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -10°C |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DS90CR283 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | LVDS |
| Nominal Supply Current | 70mA |
| Power Dissipation | 1.63W |
| Propagation Delay | 750 ps |
| Data Rate | 231 Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Number of Drivers | 4 |
| Transmit Delay-Max | 1.5 ns |
| Number of Receivers | 28 |
| Height Seated (Max) | 1.2mm |
| Width | 6.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90CR283MTD/NOPB Overview
The 56-TFSOP (0.240, 6.10mm Width)package is a good fit for this feature.A case of Tubeis provided.This component is installed in the way of Surface Mount.Devices that are capable of supplying 4.75V~5.25Vvolts may be used.Based on the [0], it is possible to locate related parts.The termination count on it is [0].Make sure this device is set to 5V.A total of 56pins are located on it.For operation, 56pins are used.In this case, it is mounted by Surface Mount.It is designed to work at a minimum working temperature of -10°C to ensure reliability.As long as the maximum value is [0], the part runs consistently.Line Driver or Receiversis the family of electronic components.In the interface IC, the supply voltage is set to 5V.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.As part of the package, it is embedded with 4drivers.
DS90CR283MTD/NOPB Features
It is based on DS90CR283.
Set the part at 5V volts
with 4 Drivers
DS90CR283MTD/NOPB Applications
There are a lot of Texas Instruments DS90CR283MTD/NOPB Specialized Interface ICs applications.
- Power routing
- High reliability control systems
- PDAs
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- PCMCIA cards
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- AD7840/8, AD7870/1/2/4/5/6/8
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Public switching systems and PBX interfaces
- Medical Instrumentation
