DS90LT012AHMF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Receiver |
| Max Power Dissipation | 902mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS90LT012 |
| Pin Count | 5 |
| Output Type | TTL |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 10μA |
| Power Dissipation | 902mW |
| Max Supply Current | 9mA |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 3.5 ns |
| Data Rate | 400Mbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/1 |
| Max Input Current | 10μA |
| Interface Standard | EIA-644-A; TIA-644-A |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.002A |
| Number of Receivers | 1 |
| High Level Input Current-Max | 0.00002A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90LT012AHMF/NOPB Overview
With the enhanced SC-74A, SOT-753 package, this driver IC is excellent for driving common LEDs.In the Tape & Reel (TR) package, this receiver is mounted.Since this part is a Receiver can transceiver, a number of solutions have been able to utiliReceivere it for various purposes.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver requires a 3V~3.6V power supply.The field can have up to 0/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is -40°C~125°C, this ic receiver was designed primarily.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 5 terminations that are used for driving and receiving signals from data.The transceiver is packaged with 5 market standard pinouts so that it can be easily used.You can search with DS90LT012 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 5-pin driver IC with enhanced power dissipation controls.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 3.3V.3 volts.A 1 receiver is included.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 9mA.
DS90LT012AHMF/NOPB Features
Tape & Reel (TR) package
5 pin count
5 pins
DS90LT012AHMF/NOPB Applications
There are a lot of Texas Instruments DS90LT012AHMF/NOPB Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Servers
- Wireless interactive experience
- Automation systems
- Portable radio
- Cordless telephone
- Car radio
- Notebook
- SONET/SDH Network
- Metro access rings
