DS92001TMAX/NOPB
| Parameters | |
|---|---|
| Type | Buffer, ReDriver |
| Applications | BLVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 726mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | DS92001 |
| Output | LVDS |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Power Dissipation | 726mW |
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2 ns |
| Current - Supply | 50mA |
| Max Output Voltage | 500mV |
| Logic Function | Buffer |
| Input | CML, LVDS, LVPECL |
| Power Consumption | 165W |
| Driver Number of Bits | 1 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 4 |
| Data Rate (Max) | 400Mbps |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
DS92001TMAX/NOPB Overview
For convenience, power buffer comes packaged in 8-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tape & Reel (TR) packages.An easy-to-adapt universal mount.As far as types go, this is a typical Buffer, ReDriver.To operate this op amp buffer, it requires a voltage of 3V~3.6V volts.Input of CML, LVDS, LVPECL is enabled by it.For optimal performance, set the operating temperature to -40°C~85°C.In addition to BLVDS, this operational amplifier buffer may also be used for other applications.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "DS92001".There are 8 terminals on the op amp buffer that you can find.During reflow, it reaches a temperature of 260.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 3.3V voltage.It outputs in LVDS.Pins on its 8 axis are present.Basically, it's a 50mA op amp buffer.A Surface Mount hole is available for mounting it on a PCB or another board.A power buffer like the power buffer plays a crucial role in the industry.Operating voltage 3.3V is required for normal operation.Receiver uses 4-Bit technology.In the most extreme case, this splitter dissipates 726mW watts.A 1 element interface repeater signal like this is used.
DS92001TMAX/NOPB Features
Mainly used in BLVDS.
A standard Line Driver or Receivers.
4-Bit receiver.
DS92001TMAX/NOPB Applications
There are a lot of Texas Instruments DS92001TMAX/NOPB Signal Buffers, Repeaters, Splitters applications.
- Multidrop Buses
- Digital Cross-Connects
- Clock Distribution
- Add/Drop Muxes
- SATA SSDs or HDDs
- Protection Switching
- Digital Crossconnects
- Communications Switchers
- Network Switches/Routers
- Storage Area Networks
