DSPIC30F2011-30I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 30MHz |
| Base Part Number | DSPIC30F2011 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Number of I2C Channels | 1 |
| Height | 4.953mm |
| Length | 23.37mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2011-30I/P Overview
A space-saving advantage is that it is included in the 18-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. This item can be found in package Tube. Devices with dsPIC core processors are available. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FLASH. There are 12 I/Os on it, which makes it a very simple device. It has a part number of DSPIC30F2011 that can be used to locate similar components. DUAL is the location of its terminals. 18 terminationals are present. dsPIC? 30F is the series number of this electrical component. By using a 5V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. 18 pins are used to construct it. This mount is done in accordance with the method of Through Hole. A total of 18 pins are attached to it. Digital Signal Processors contains this component. Memory size for the devices is 12kB, which can be used to store programs and data. This device achieves excellent efficiency at frequencies of 30MHz. Using 5V's adaptability as a supply voltage allows designers to maximize its use. 3 counters/timers are currently active. Using an oscillator type of Internal, it works.
DSPIC30F2011-30I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F2011-30I/P Applications
There are a lot of Microchip Technology DSPIC30F2011-30I/P Microcontroller applications.
- Toasters
- Wastewater treatment
- Coffee machines
- Computed Tomography (CT scan)
- Fire alarms
- Digital set-top boxes
- Broadband technology, video and voice processing
- Oscilloscopes
- Electromechanical control
- Playstation
