DSPIC30F4012-20E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4012 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
DSPIC30F4012-20E/ML Overview
Due to its space-saving qualities, it is available in the 44-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. In the package Tube, it is included. There is a dsPIC as core processor in this device. When working, the temperature should be kept at -40°C~125°C TA. The type of memory it uses is FLASH. There are 20 I/Os on the board. To find comparable components, use the DSPIC30F4012 base part number. This device has terminals at QUAD. 44 terminations are present in it. In the dsPIC? 30F series, this electrical component is found. Because of the 5V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 44 pins. According to Surface Mount, it is mounted. There are 44 pins on it. It falls under the category of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 48kB. The system is highly efficient when working at a frequency of 20MHz. A total of 5 timers/counters are present. An oscillator type Internal is required for it to work.
DSPIC30F4012-20E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4012-20E/ML Applications
There are a lot of Microchip Technology DSPIC30F4012-20E/ML Microcontroller applications.
- Dialysis machines (performs function of liver)
- Guidance-GPS
- Safety -airbags, automatic braking system (ABS)
- Glucose monitoring systems (for Type 1 Diabetes)
- Embedded gateways
- Fire detection & safety devices
- DCS control intelligent sensor
- Scanners
- Volt meter
- Food and beverage
