DSPIC33EP128GP506-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128GP506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| ROM (words) | 43690 |
| Format | FLOATING-POINT |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP128GP506-I/PT Overview
For the purpose of saving space, it is available in the 64-TQFP package. This is mounted using the Surface Mount method. A package of Tray contains it. The device has a dsPIC core processor. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 53 I/Os are present on the device. A component with the same part number as DSPIC33EP128GP506 can be compared to other similar components. QUAD is the location of its terminals. There are a total of 64 terminations in it. An electrical component such as this is included in the series dsPIC? 33EP. Because of the 3.3V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 64 pins are required to construct this device. This device has a total of 64 pins. In Digital Signal Processors, this component is included. Using the devices' 128kB memory size, you can store programs and data. This device achieves excellent efficiency at frequencies of 70MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. 5 timer/counters are present. An oscillator type Internal is required for it to work.
DSPIC33EP128GP506-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128GP506-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP128GP506-I/PT Microcontroller applications.
- Blood pressure monitors
- Projector
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Data acquisition and control
- Toys
- Safety -airbags, automatic braking system (ABS)
- Auto-breaking system
- Oscilloscopes
- Automatic staplers
- Wastewater treatment
