DSPIC33FJ32MC204-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 70mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 9 |
| Number of SPI Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ32MC204-I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. It is mounted using the way of Surface Mount. In the package Tray, it is included. The device has a dsPIC core processor. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. 35 I/Os can be found on it. Based on its base part number of DSPIC33FJ32MC204, other similarly-sized components can be found. At QUAD, it has its terminals. 44 terminations are present in it. The electrical component is part of the series dsPIC? 33F. Because of the 3.3V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 44 pins are used in its construction. The method of Surface Mount is used to mount it. It has a total of 44 pins on it. In the subcategory of Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 32kB. The maximum supply current is set at 70mA. At a frequency of 40MHz, it can achieve excellent efficiency. 3.3V offers full adaptability and voltage supply when it is employed by designers. There are 3 timers/counters. Using an oscillator type Internal, it operates.
DSPIC33FJ32MC204-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32MC204-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ32MC204-I/PT Microcontroller applications.
- Speed meter
- Equipment control
- Accu-check
- Microwave ovens
- Gas monitoring systems
- Missile control
- Switches
- Current meter
- Security systems
- Industrial instrumentation devices
