DSPIC33FJ64GP804-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ64GP804-E/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. It comes in the package?of a Tray. It is equipped with a dsPIC core processor. During work, the temperature should remain at -40°C~125°C TA. FLASH has been assigned to it as a program memory. 35 I/Os are present on the device. It has a part number of DSPIC33FJ64GP804 that can be used to locate similar components. The position of the device is QUAD at terminal. Currently, it consists of 44 terminationals. It is a member of the Automotive, AEC-Q100, dsPIC? 33F series of electrical components. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. A total of 44 pins are required to construct this device. According to Surface Mount, it is mounted. There are 44 pins on it. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 64kB. In this case, 76mA represents the maximum current supply. When working at a frequency of 40MHz it is able to achieve excellent efficiency. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. The number of timers and counters is 5. Using an oscillator type Internal, it operates.
DSPIC33FJ64GP804-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP804-E/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64GP804-E/PT Microcontroller applications.
- Smoke alarms
- Ipad
- Light sensing & controlling devices
- Traditional industrial transformation
- Industrial robot
- Communication-bluetooth, Wi-Fi, radio
- DCS control intelligent sensor
- Glucose monitoring systems (for Type 1 Diabetes)
- Copiers
- Pacemakers (used to control abnormal heart rhythm)
