E3T-FT13R
| Parameters | |
|---|---|
| Number of Pins | 3 |
| Operating Temperature | -25°C~55°C |
| Published | 2012 |
| Series | E3T |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Cable |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Output Configuration | PNP - Open Collector/Light-ON |
| Response Time | 1ms |
| Sensing Distance | 19.685 (500mm) |
| Sensing Method | Through-Beam |
| Connection Method | Cable |
| Light Source | Red (650nm) |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3T-FT13R Overview
For reliable operation, the photoelectric sensor's temperature should be set to -25°C~55°C. For these electronic components to work, the voltage should be provided by 12V~24V. For photoelectric sensors, 1ms is considered an ideal response time. To maintain reliability, the photoelectric sensor works at a minimum temperature of -25°C. The maximum operating temperature is 55°C, so it's reliable. To make the photoelectric sensor work properly, 3 pins must be connected.
E3T-FT13R Features
Sensing Distance: 19.685 (500mm)
3 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3T Series
E3T-FT13R Applications
There are a lot of Omron Automation and Safety E3T-FT13R Photoelectric Sensors applications.
- Monitoring bigger areas for objects with light grids
- Checking objects on production lines or conveyors
- Mechanical engineering
- Contrast sensors
- Passive infrared sensors
- Luminescence sensors
- Pharmaceutical industry
- Entrance and gate
- Detecting colours
- Automatic doors
