E3Z-D87
| Parameters | |
|---|---|
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Output Type | ANALOG CURRENT |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 1ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Connector |
| Light Source | Infrared (860nm) |
| Min Supply Voltage (DC) | 12V |
| Output Range | 100mA |
| Measurement Range-Max | 1000 mm |
| Height | 33.2mm |
| Length | 20mm |
| Width | 10.8mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67, IP69K |
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -30°C~55°C |
| Published | 2001 |
E3Z-D87 Overview
Photoelectric sensors should be set at -30°C~55°C for reliable performance. For these electronic components to function, a circuit or system should have 0 volts. The ideal response time for a photoelectric sensor is 1ms. For the photoelectric sensor to work properly, 4 pins must be connected in order to make it work. Photoelectric sensors need 100mA at their outputs to work. It is possible to apply a voltage of 24V to the photoelectric sensor in a DC circuit without causing damage. At low voltages, such as 12V, this photoelectric sensor is capable of working.
E3Z-D87 Features
Sensing Distance: 39.370 (1m)
4 pins
Response Time: 1ms
Operating Temperature: -30°C~55°C
E3Z Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
E3Z-D87 Applications
There are a lot of Omron Automation and Safety E3Z-D87 Photoelectric Sensors applications.
- Automotive industry
- Detecting colours
- Mechanical engineering
- Monitoring bigger areas for objects with light grids
- Logistics and materials handling
- Material handling
- Counting small objects
- Zone scanners
- Measuring distance
- Checking objects on production lines or conveyors
