EPC2LI20
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| Series | EPC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | IT CAN ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPC2 |
| JESD-30 Code | S-PQCC-J20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 1.6Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 12.5MHz |
| Supply Current-Max | 0.05mA |
| Organization | 1695680X1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 1695680 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
EPC2LI20 Overview
An interesting 20-LCC (J-Lead) package is used for this.Packaging for Tube.As a qualified employee, I can operate within -40°C~85°C.In System Programmable allows for programmability.FPGA is fed wFPGAh a voltage of 3V~3.6V 4.5V~5.5V.This memory device is mounted in Surface Mount.There is a limit of 1.6Mb MB for the amount of data that can be stored.Other components related to "EPC2" can also be found by searching the word.3.3V is the required supply voltage.20 terminations with different functions.In order to use this memory device, a maximum voltage of 3.6V should be used.3V must be the minimum voltage supplied to the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.When soldering in reflow mode, the temperature should be kept below 220 at all times during the soldering process.This memory transmit data in the SERIAL process way.A memory chip can operate at a voltage no greater than 0.05mA.In terms of speed, this is a memory IC that operates at a 12.5MHz frequency.The use of 3.3/5V power supplies is recommended.Our product line now includes IT CAN ALSO OPERATE AT 5V SUPPLY in order to provide a better level of service to our customers.The device belongs to the EPC series.There is a kind of Flash Memories in it.
EPC2LI20 Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
EPC2LI20 Applications
There are a lot of Intel EPC2LI20 applications of configuration proms for FPGAs.
- graphics card
- servers
- networking
- eSRAM
- workstations,
- personal digital assistants
- multimedia computers
- Camcorders
- nonvolatile BIOS memory
- personal computers
