EPCS128SI16N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPCS |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | EPCS128 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 128Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.02mA |
| Organization | 128MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 134217728 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 100000 Write/Erase Cycles |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
EPCS128SI16N Overview
This package makes use of the 16-SOIC (0.295, 7.50mm Width) programming language.Packaging for the external use of Tube.-40°C~85°C-qualified.This device can be programmed using the In System Programmable language.This device is fed with a voltage of 2.7V~3.6V which is applied to it.There is a memory device mounted in Surface Mount.FPGA is limFPGAed to 128Mb bytes for the size of the data storage.Search "EPCS128" for related parts.The supply voltage is 3.3V.FPGA is possible to connect different functions on the 16 axis at different terminations.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.To supply the device, a minimum voltage of 3V is a must.This is a CONFIGURATION MEMORY memory chip.Reflow soldering should be done at NOT SPECIFIED°C maximum.Through SERIAL-processing, data is transmitted from this memory to the CPU.The memory chip operates at a voltage of no more than 0.02mA.I think it's important to point out that this is a memory IC that has a 20MHz frequency that can be operated at.The use of 3.3V power supplies is recommended.This device is part of the EPCS series.In specific, it can be described as a form of Flash Memories.
EPCS128SI16N Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
EPCS128SI16N Applications
There are a lot of Intel EPCS128SI16N applications of configuration proms for FPGAs.
- servers
- cell phones
- telecommunications
- printers
- data buffer
- supercomputers
- mainframes
- graphics card
- main computer memory
- nonvolatile BIOS memory
