EPCS1SI8
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPCS |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPCS1 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.015mA |
| Organization | 1MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 1048576 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 100000 Write/Erase Cycles |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
EPCS1SI8 Overview
A neat 8-SOIC (0.154, 3.90mm Width) package is used.External packaging of type Tube.An individual who is qualified to operate within the -40°C~85°C domain.In System Programmable is the program that allows it to be programmed.FPGA is fed wFPGAh a voltage of 2.7V~3.6V.The memory device is mounted in Surface Mount.FPGA is limFPGAed to 1Mb bytes for the size of the data storage.Try searching "EPCS1" for more parts.There is a voltage requirement of 3.3V for supplying it with power.8 terminations with different functions.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.To supply the device, a minimum voltage of 3V is a must.A CONFIGURATION MEMORY memory chip like this is used for data storage.The reflow soldering process should be done at a temperature no higher than 235.This memory transmit data in the SERIAL process way.The memory chip is allowed to operate at a voltage that is no greater than 0.015mA.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 20MHz.3.3V power supplies are recommended.The device belongs to the EPCS series.More specifically, it's a kind of Flash Memories.
EPCS1SI8 Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
EPCS1SI8 Applications
There are a lot of Intel EPCS1SI8 applications of configuration proms for FPGAs.
- personal digital assistants
- networks
- mainframes
- data buffer
- multimedia computers
- supercomputers
- hard disk drive (HDD)
- main computer memory
- eSRAM
- personal computers
