EPCS64SI16N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPCS |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPCS64 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 64Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.02mA |
| Organization | 64MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 67108864 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 100000 Write/Erase Cycles |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
EPCS64SI16N Overview
FPGA uses a neat 16-SOIC (0.295, 7.50mm Width) package.Packaging for external use.-40°C~85°C license holder.The In System Programmable programming language can be used to program it.The voltage fed to it is 2.7V~3.6V.There is a memory device mounted in Surface Mount position for this device.Data storage is limited to 64Mb bytes.Look for "EPCS64" for other related parts.The supply voltage should be 3.3V.Different functions are associated with 16 terminations.FPGA is possible to use this memory device at a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.Using CONFIGURATION MEMORY memory chips, this is what you get.If you're reflow soldering, you shouldn't go above 260.With the help of SERIAL-processing, data is sent through this memory.Memory chips can operate at a voltage no higher than 0.02mA.Using a 20MHz frequency, this memory IC can work at high speeds.3.3V power supplies are recommended.EPCS series devices are included in it.I think of it as a sort of Flash Memories.
EPCS64SI16N Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
EPCS64SI16N Applications
There are a lot of Intel EPCS64SI16N applications of configuration proms for FPGAs.
- workstations,
- networking
- Camcorders
- eSRAM
- multimedia computers
- cell phones
- personal digital assistants
- graphics card
- servers
- telecommunications
