EPM2210F324C5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 324 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 272 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 19mm |
| Width | 19mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210F324C5 Overview
There are 1700 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the FBGA package.There are 272 I/Os on the board.324terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 2.5V volts.The part is included in Programmable Logic Devices.Bulkshould be used for packaging the chip.There are 324pins on the chip.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In order to store data, FLASHis used.A Surface Mountis mounted on this electronic component.There are 324 pins embedded in the device.This device operates at a voltage of 3.6Vas its maximum supply voltage.It is powered by 2.375Vas its minimum supply voltage.A programmable I/O count of 272 has been recorded.In this case, 1.8797GHzis the frequency that can be achieved.In order to operate, the temperature should be higher than 0°C.Temperatures should not exceed 85°C.In its simplest form, it consists of 221 logic blocks (LABs).There are 2210 logic elements/cells on the device.The maximal frequency should be lower than 304MHz.It is possible to store data and programs in the devices' 1kBmemory.
EPM2210F324C5 Features
FBGA package
272 I/Os
324 pin count
324 pins
221 logic blocks (LABs)
EPM2210F324C5 Applications
There are a lot of Altera EPM2210F324C5 CPLDs applications.
- USB Bus
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Synchronous or asynchronous mode
- ROM patching
- Field programmable gate
- I/O PORTS (MCU MODULE)
- Auxiliary Power Supply Isolated and Non-isolated
- Configurable Addressing of I/O Boards
- Handheld digital devices
- Parity generators
