EPM240GF100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240GF100C5N Overview
There are 192 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.FBGAis the package in which it resides.There are 80 I/Os on the board.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of BOTTOM.Power is provided by a supply voltage of 1.8V volts.This part is part of the family [0].There are 100 pins on the chip.The device can also be used to find [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.The pins are [0].In this case, the maximum supply voltage is 1.89V.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.A programmable I/O count of 80 has been recorded.This frequency can be achieved at 1.8797GHz.In order to operate, the temperature should be higher than 0°C.Ideally, the operating temperature should be below 85°C.The system consists of 24 logic blocks (LABs).In order to form a fundamental building block, there are 240 logic elements or cells.It is recommended that the maximum frequency is less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM240GF100C5N Features
FBGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GF100C5N Applications
There are a lot of Altera EPM240GF100C5N CPLDs applications.
- Software-driven hardware configuration
- DMA control
- Voltage level translation
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- High speed graphics processing
- Configurable Addressing of I/O Boards
- Parity generators
- Dedicated input registers
- Address decoders
- Synchronous or asynchronous mode
